Mean Well LPF-16D-54 juhend

Mean Well LPF-16D-54
7.5 · 1
PDF juhend
 · 6 lehekülge
Inglise
juhendMean Well LPF-16D-54
Installation Manual
TypeLED Power Supply
FamiliesAP, CEN, CLG, ELG, ELN, GSC, HBG, HLG, HLN, HLP, HSG, HVG, LCM, LP, LPF, PLC, NPF, OWA, PCD,
PLC, PLD, PLM, PLN, PLP, PWM, ULP

Introduction

The LED power supply is a dedicated LED driving device that delivers a constant current/voltage or generates an
adjustable current controlled by an external dimmer to LEDs. Depending on its types or design concept, some of
them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.
Mean Well’s LED power supplies include metal case, plastic case, and PCB types.

Installation

1Before commencing any installation or maintenance work, please disconnect the power supply from the utility.
Ensure that it cannot be re-connected inadvertently!
2Keep proper ventilation around the unit and do not stack any object on it. Also a 10-15 cm clearance must be
kept when the adjacent device is a heat source.
3Mounting orientations other than standard orientation or operate under high ambient temperature may
increase the internal component temperature and will require a de-rating in output current. Please refer to
the specification sheet to receive the optimum mounting position and information about the de-rating curve.
4Current rating of an approved primary /secondary cable should be greater than or equal to that of the unit.
Please refer to its specification.
5For LED power supplies with waterproof connectors, verify that the linkage between the unit and the lighting
fixture is tight so that water cannot intrude into the system.
6For dimmable LED power supplies, make sure that your dimming controller is capable of driving
these units. For ELN series, either “D” or “Ptype, require 40mA each unit; for those with “3 in 1” dimming
function, e.g. HLG and LPF series, require 0.15mA each unit.
7Wiring: The wire color will vary by country, please refer to the table below.
North America
European Harmonized
Live and ACL
Black
Brown
Neutral and ACN
white
Blue
PE and FG (Class I only)
Green
Green/yellow
aConnect the FG wire (green or green/yellow) of the LED power supply to PE (green or green/yellow), this
step can be skipped when the unit is marked class II, ungrounded.
bConnect the ACL wire (black or brown) of the LED power supply to Live (black or brown).
cConnect the ACN wire (white or blue) of the LED power supply to Neutral (white or blue).

Juhend

Vaadake Mean Well LPF-16D-54 juhendit tasuta siin. See juhend kuulub kategooriasse Kategoriseerimata ja seda on hinnanud 1 inimest, kelle keskmine hinnang on 7.5. See juhend on saadaval järgmistes keeltes: Inglise. Kas teil on küsimus toote Mean Well LPF-16D-54 kohta või vajate abi? Esitage oma küsimus siin

Vajate abi?

Kas teil on küsimus kaubamärgi Mean Well mudeli LPF-16D-54 kohta ja vastust pole juhendis? Esitage oma küsimus siin. Kirjeldage oma probleemi selgelt ja põhjalikult. Mida paremini te probleemi kirjeldate, seda lihtsam on teistel Mean Well LPF-16D-54 omanikel teile head vastust pakkuda.

Küsimuste arv: 0

Mean Well LPF-16D-54 spetsifikatsioonid

Te leiate kaubamärgi Mean Well mudeli LPF-16D-54 spetsifikatsioonid ja kasutusjuhendi altpoolt.

Üldine
Kaubamärk Mean Well
Mudel LPF-16D-54
Toode Kategoriseerimata
Keel Inglise
Failitüüp Kasutusjuhend (PDF)

Korduma kippuvad küsimused

Te ei leia juhendist oma küsimusele vastust? Te võite leida vastuse oma küsimusele kaubamärgi Mean Well mudeli LPF-16D-54 kohta allpool.

Kas teie küsimust ei ole loendis? Esitage oma küsimus siin

Tulemused puuduvad